Toggle anchor W-F
Toggle anchor W-F
DWL-ANCH-WO.THREADROD-M8
Art.-no.
0904746008
EAN 4045989261604
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Toggle anchor without rod
Advantages
- The toggle anchor (adjustable feet) expands in any position due to spring force.
- Toggle anchors require a smaller gap than rocker pads.
Features
- Galvanised steel.
- Fully pre-assembled.
- The anti-rotation lock (pins) prevents rotation during installation.
- It allows load values because its application is spread over a large surface area.
Application area
For fitting suspended ceilings and other light suspended elements using threaded rods M4, M5, M6 or M8.
Thread type | Metric thread |
| Capacity data | |||||||||
| Toggle anchor diameter [mm] | Model | M3 | M4 | M5 | M6 | M8 | M10 | ||
| Tensile load | Taking into account the strength of the substrate | F = [kN] | W-F | - | 0,95 | 1,95 | 1,30 | 1,40 | - |
| Without taking into account the strength of the substrate | |||||||||
| Features | |||||||||
| Thread dia. | dr = [mm] | 3 | 4 | 5 | 6 | 6 | 10 | ||
| Drill bit diameter | db = [mm] | 11 | 14 | 16 | 20 | 24 | 30 | ||
| Diameter of hole of part to fit | dp= [mm] | 4 | 5 | 5 | 8 | 10 | 14 | ||
| Minimum cavity depth | ≥ h = [mm] | 30 | 40 (W-F=26) | 33 | 37 | 54 | 90 | ||
Product information
Datasheets(X)
Last viewed
Impact tool assortment
Thread die HSS DIN EN 22568 for standard metric ISO threads
Hand tap, taper tap HSS DIN 352
1/2" socket wrench insert For TX screws, short
2-way tap
Point chisel For pneumatic chipping hammers
Allen key
1/4 inch socket wrench insert, metric short
Furniture twin castor rotatable
Snap-off blade
