Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 1

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 2

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 3

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 4

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 5

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 6

Tipmatic XP Plus jig - DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS - 7

Tipmatic XP Plus jig

Name: Tipmatic XP Plus jig
Brand: Würth
SKU: F146083257

Drilling jig for Tipmatic XP Plus
DRLJIG-CARCRL-(DWD-XP)/TIPMATICPLUS
GRASS

Art.-no. F146083257

EAN 9007181646042

All versions

Similar products

Prices for customers after login

Tipmatic XP Plus jig

Art.-no. F146083257

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Enables pre-drilling for the Tipmatic-XP Plus stop

Use with the jig

The jig is made up of:

2 x pins for pre-drilling Euro screws

2 x pins for pre-drilling chipboard screws Ø 3.5 mm

1 x hexagon key

2 x grub screws to secure the pins inserted in the jig

1 x Tipmatic-XP Plus jig

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Instructions

1) Perforate the side of the cabinet using the template for Dynamic guide rails, for Euro screws (Ø 5 mm) or chipboard screws Ø 3.5 mm (centre drill)

2) The position of the Tipmatic-XP Plus jig is dependent on the length of the guide rail, choose the position by inserting pins in the drilled holes (Euro or chipboard screws) made previously (see figures A + B)

3) After positioning the Tipmatic-XP Plus jig, you can pre-drill the Tipmatic-XP stop (see figure C)


Material	Aluminium, steel

Required accessory:

Product

Description

Quantity

Price
/PU

Centre drill bit

EXT-DRLBIT-WO-CENT-SCR-D2,7MM

Art.-no. 0650827

Perform centred pre-drilling for 3.5 mm diameter mounting screws in a single work process

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU