Thread-rolling screw
DIN 7500-1 steel zinc plated flat head TX shape PE
SCR-PANHD-DIN7500-PE-TX30-(A2K)-M6X35
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M6 |
Länge (l1) | 35 mm |
Head diameter (dk) | 12 mm |
Hauteur de tête (k1) | 4.6 mm |
Forme de tête | Pan head |
Matière | Steel |
Finition | Zinc plated |
Type de filetage | Metric thread |
Empreinte intérieure | TX30 |
Normes | DIN 7500 |
Conforme à la norme RoHS | Yes |
Last viewed
Interior trim clip, opened
Sanding system dust-free sanding disc Useit® Superpad F
Chemical anchoring WIT-EA 150
1/4 inch socket wrench insert, metric short
Double ring ratchet wrench set 32 pieces
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1
Lashing strap with clamping lock and fitting
Superglue set, 3 pcs
Cordless impact wrench ASS 18 1/2 inch COMPACT M-CUBE
Comfort FFP3 R D breathing mask - preformed 3M With Cool-Flow exhalation valve up to 30 times the threshold value