Thread-rolling screw
DIN 7500-1 steel zinc ptd. cheese head IS shape EE
SCR-CYL-DIN7500-EE-HS3-(A2K)-M4X10
Register now and access more than 125,000 products
Thread-rolling screws form a nut thread in cast blind holes, rim holes and drilled, lasered and punched sheet metal parts. Unlike thread cutting, thread-rolling does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Cost savings
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened counter thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Retention mechanism
The formed thread corresponds to a standard metric thread
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 10 mm |
Head diameter (dk) | 7 mm |
Head height (k1) | 4 mm |
Internal drive | HS3 |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Thread type | Metric thread |
Head type | Socket head |
Form | EE |
RoHS-compliant | Yes |
Last viewed
Universal connection sleeve electrically conductive
Threaded fitting, stainless steel, with ball joint
Rod lashing rail
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Caracas S1P low-cut safety shoes
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Hammer drill bit Plus Duo-S Vario
Drill support, pst-instlld rebar connctn
Bevelled-edge chisel
AP damp-room grounding contact outlet Without lock