Thread-rolling screw
DIN 7500-1 steel zn ptd. counters. head Z shape ME
SCR-CS-DIN7500-ME-Z2-(A2K)-M3,5X8
Register now and access more than 125,000 products
Thread-rolling screws form a nut thread in cast blind holes, transition points, drilled, lasered and punched sheet metal parts. Unlike thread cutting, with thread-rolling, the structure of the material is not interrupted in the counter thread but rather displaced and strain-hardened.
Eliminates thread-cutting
Saves on costs
Non-cutting thread formation
TRILOBULAR shape of the screw combined with the radius profile of the thread flanks
- Low tapping torque with greater flank coverage by the thread
High clamping force
Large thread flank coverage
High load-bearing capacity
Strain-hardened counter thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking seating of the thread
- Reduced likelihood of screw working loose
Protection against loss
The formed thread constitutes a "metric" standard thread
Datasheets(X)
 | |
Thread type x nominal diameter (d1) | M3.5 |
Length (l1) | 8 mm |
Head diameter (dk) | 7.2 mm |
Head height (k1) | 1.65 mm |
Standards | DIN 7500 |
Material | Steel |
Surface | Zinc plated |
Internal drive | Z2 |
Thread type | Metric thread |
Thread design | 0 - not applicable |
Form | ME |
Head type | Countersunk head |
Head details | 0 - not applicable |
Property class | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Spirit level made of light metal
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Clamping flange
Wall-mounted roll holder For cleaning paper rolls with waste bag holder
Foam roller WB ECONOMY For water-based paints
Sweat band For the back of the head
Clothes rail holder, L-bracket
End cap set For screwing/clipping on
Jump starter, 12/24 V
Guide drill bit A014C For adapter A2