Thread hanger W-GWA Suitable for all DIGA® CS devices
Thread hangers W-GWA
THRHNG-(F.DIGA-CS2)-M8
Register now and access more than 125,000 products
Quick, easy installation
No drilling or anchors required
Datasheets(X)
 | |
Material | Hardened steel |
Surface | Zinc plated |
Colour | Zinc, Red |
Baseplate length (A) | 75 mm |
Baseplate width (B) | 18 mm |
Thread length (lg) | 8 mm |
Baseplate thickness (t) | 1.5 mm |
Height | 25 mm |
Last viewed
Counter nut, brass PG
Standard cable tie with plastic latch
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated, blue passivated (A2K)
Spring For slate cutters
Wet/dry filter bag, fleece
Screw and washer assembly, type 2 With metric thread
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
Guide drill bit A014C For adapter A2
Metric double open-end wrench DIN 3110/ISO 1085
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip