Thin sheet metal screw With hexagon head DBS
Thin sheet metal screw DBS steel zinc plated
SCR-DBS-WS8-(A3K)-4,8X20
ZEBRA
Register now and access more than 125,000 products
Advantages of the tip geometry:
- No pre-drilling
- Shingless screws due to material displacement
- Higher extraction values due to the tension of the thread forming
Suitable for component combinations tI / tII according to approval ETA-10/0184
- Steel / Steel - for ∅ 4,8 mm
In dry interior applications
Zinc-plated drilling screws may only be used where dampness is not to be expected. For connection elements with a construction permit, the permit, and in particular Part 2 "Special regulations", must always be observed.
Datasheets(X)
 | |
Matière | Steel |
Finition | Zinc plated |
Conforme à la norme RoHS | Yes |
Forme de tête | Hexagon head |
Type d’entrainement | Hexagon |
Type de filetage | Self-tapping screw thread |
Thread design | Full thread |
Forme de pointe | Tip |
Underground | Steel, Aluminum |
Diamètre nominal (d1) | 4.8 mm |
Länge (l1) | 20 mm |
Head diameter (dk) | 10.5 mm |
Hauteur de tête (k1) | 4.5 mm |
Entrainement extérieur (s1) | WS8 |
Max. material thickness to be drilled through (metal) | 2.5 mm |
For max. substructure thickness | 1.25 mm |
Approval | ETA-10/0184 |
Last viewed
Packfix packing film
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
Handle
RW® bit
RW® bit
Plastic sleeve For 1/2 inch impact socket
Twist drill bit HSS DIN 338 type RN 118°
Push-in rivet
VDE screwdriver set, slotted/PH recessed head 5 pieces
Twist drill bit HSCo DIN 338 type RN bronze point thinning