TIPP® fixed point attachment with galvanised pipe clamps and spacer pipe
Fixed point attachment TIPP steel zinc plated
FIXPTCLMP-(DN20)
Art.-no. 0543400026
EAN 4047376888722
Register now and access more than 125,000 products
- The mounting holes on the side enable flexible and simple installation on Varifix brackets and strut channel
- Structure-borne sound insulation in accordance with DIN 4109 via EPDM rubber inlay
Datasheets(X)
CAD data (available after login)
For wall and ceiling attachment.
Attachment on C-assembly rails or brackets via combination sliding nut, U washer and hexagonal bolt M10. Direct attachment to wall or ceiling with e.g. screw anchor W-SA or fixing bolt anchor W-FAZ/S M10. Elevation of fixed-point brackets achieved using threaded rods.
 | |
Diameter (ØD) | 26.9 mm |
Diameter tubular stiffener (ØDH) | 26.9 mm |
Tube axis dimension (RA) | 119 mm |
Bottom of pipe (RS) | 105 mm |
Length (L1) | 143 mm |
Width (B) | 100 mm |
Length 2 (L2) | 60 mm |
Material thickness (t) | 5 mm |
Metal-band width (BM) | 20 mm |
Metal belt thickness (tM) | 1.5 mm |
Elongated hole width (LB) | 11 mm |
Elongated hole length (LL) | 11 mm |
Hole distance (LA) | 78 mm |
Permissible horizontal load (FX) | 4 kN |
Permissible vertical load (FY) | 4 kN |
Surface | Zinc plated |
Permissible load | 4 kN |
Material | Structural steel, 1.0037 |
Product weight (per item) | 1680.000 g |
Sustainability | Resources, Pollutants / Emissions |
Last viewed
Test connection for tube connector female thread with cover
1/4" socket wrench insert slotted
Metric double open-end wrench DIN 3110/ISO 1085
1/2 inch socket wrench insert metric, hexagon, short
Crimping pliers for wire end ferrules
Foam nozzle
Cable tie KBL INOX made of stainless steel AISI 304 V2A with ball closure
Cutting disc, carbide-tipped
1/4 inch socket wrench insert, metric short
Wire stripping pliers, adjustable