TILE LEVELLING SYSTEM TWO BREAKING POINTS
Levelling system for cer. tiles 2 breaking points
LEVLSYS-SPRT-PP-TRANSPARENT-1,5MM
Art.-no.
0519190010
EAN 4053479128771
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
- Quick and simple system for precise levelling when positioning tiles.
- Suitable for both vertical and horizontal positioning.
- For 1, 1.5, 3 and 5 mm joints.
- Suitable for all kinds of surfaces, including ceramics, stoneware, porcelain, marble, granite and more.
- For workpiece thicknesses between 2 and 18 mm.
- For all types of tile positioning, from stacked to offset.
- Two breaking points for increased substrate stability.
NoticeThe joint must be a minimum of 1.5 mm for the surface to adhere. The levelling mount is not designed for positioning tiles with 1 mm joints.
Product information
Datasheets(X)
Application areaOnce the cement glue is applied, position the tile and wedge it using the levelling mounts in the corners, leaving a 5 cm distance from the corner's vertex. Then, continue to position the adjacent tiles, following the same process. Tighten the levelling mount manually by screwing on the nut. After 24 hours, remove the mount and nut assembly by striking it using a mallet, always in the direction of the joint.
Thickness | 9.8 mm |
Colour | Transparent, matt |
Material | PP - Polypropylene |
Width | 36 mm |
Height | 57.6 mm |
Last viewed
Joint For Top Gun paint guns and cleaning gun
1/4" socket wrench insert PH
MBS HW cylinder saw
Comfort breathing mask - folded 3M Aura 9300+
Sheet metal nut, type 9
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Empty case for MH 11-XE demolition hammer
Aluminium paste AL 1100
Flat steel concrete anchor L-profile
Countersunk tapping screw shape C with H recessed head DIN 7982, A2 stainless steel, with tip