TIG welding torch WET 17 V
TIG torch WET 17 V
TRCH-F.WELDSYS-(TIG-WET-17V)-LNG
Register now and access more than 125,000 products
- Better welding perfection
- Increased welding cleanliness (little slag)
- Articulated handle for greater flexibility
The torch handle is applied to the negative pole of the welding device, and the ground cable is applied to the positive pole. The gas pressure should be set between 5 and 7 L depending on the type of parts to be welded. When welding on stainless steel, the tungsten electrode should be sharpened to an angle of approximately 30°.
Product weight (per item) | 1.000 g |
Datasheets (0)
Certificates/ Documents (0)