TIG welding torch WET 17 V
TIG torch WET 17 V
TRCH-F.WELDSYS-(TIG-WET-17V)-6,5MM
Register now and access more than 125,000 products
- Better welding perfection
- Increased welding cleanliness (little slag)
- Articulated handle for greater flexibility
Datasheets(X)
The torch handle is applied to the negative pole of the welding device, and the ground cable is applied to the positive pole. The gas pressure should be set between 5 and 7 L depending on the type of parts to be welded. When welding on stainless steel, the tungsten electrode should be sharpened to an angle of approximately 30°.
Product weight (per item) | 1 g |
Last viewed
1/2-inch T-handle
Concealed hinge TIOMOS click-on 155
Hand tap, third tap HSS DIN 352
Spare screen For Ultimate face shields
Hand tap, second tap HSS DIN 352
Two-hand loppers
Metric combination wrench with POWERDRIV®
Angle grinder protective panel on both sides WSH 230
Wire end ferrule with plastic sleeve
VARIFIX® hammer head fastener standard fix Pre-assembled with nut and washer, zinc-plated