TIG filler electrode AISI 316 LSi
St. steel welding rod TIG AWS A5.9-93:ER316LSi
WELDROD-TIG-316LSI-2,0MMX1M
Register now and access more than 125,000 products
Very low carbon welding electrodes for welding alloys of type 18Cr8Ni, 18Cr8Ni3Mo. Resistant to corrosion and acids of type AISI 316L. Welding is done with pure argon as protective gas. The contribution of silicon to the alloy gives us a greater fluidity in the melting bath.
Classifications
TÜV 5336
UDT
DB 43.039.06
Approval
TÜV 5335
UDT
DB 43.039.01
| Tensile tests | Resilience tests | ||||||
| Min req. | Yield strength | Breaking load | Extension distance | +20 | -110 | -196 | |
| MIN. | 225 Mpa | 490 Mpa | 30 % | 50 J | 40 J | ||
| AW | MAX. | 740 Mpa | |||||
| 400°C | 140 Mpa | ||||||
| A.W. | 480 Mpa | 630 Mpa | 33 % | ||||
| Chemical composition | |||||||
| C | Si | Mn | Cr | P | S | Ni | Mo |
| <0.025 | 1,0 | 2,0 | 20 | 0,030 | 0,025 | 13,0 | 3,0 |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cut-resistant/chainsaw jacket
Sidewall lining
WÜPLAST® pan head screw with hexalobular drive WN 1452, steel 10.9, zinc-plated, transparent passivated (A3K)
Nozzle
1/2" socket wrench insert Inch, short
Brake pipe nipple, type E
MG-ZD 7 segmented-bow designer furniture handle Made from die-cast zinc
Hammer drill bit Plus Duo-S Vario
Extension, brass Metric according to EN 60423
Valve setting blade
