THF-free PVC adhesive TIXPRO
Adhesive for TIXPRO PVC, without THF
ADH-PVC-TIXPRO-125ML
Register now and access more than 125,000 products
Features
- High viscosity
- Excellent fluidity.
- Reinforced safety cap to prevent unnecessary spillage.
- Cap includes child-proof safety mechanism.
- Easy to apply.
- Good gap-filling capacity thanks to the high resin content.
- Strong bond once glued, which maintains strength and ageing characteristics compared to rigid PVC.
- WRAS-certified for contact with drinking water.
- AENOR-certified.
Advantages
- High thixotropic index, which allows it to hold its shape during application.
- Its high strength means it can act as a chemical welder for PVC, avoiding fluid losses.
- Can be used for both small and large diameters.
Benefits
- Ideal for water supply, irrigation, gas pipes, industrial piping, and drainage and storm pipes.
- The child-proof cap helps prevent accidents in the work area.
- Does not run or form drips inside glued pipes.
Work at low temperatures (below 5°C) require different practices: the pipe ends and fittings to be joined must be heated to 25-30°C with a heat gun. The completed joint should be kept for about 10 minutes at 20-30°C to ensure proper curing. For applications in drinking water, wait for at least 24 hours of curing at 23°C.
Datasheets(X)
1. Prepare pipes by cutting them at a right angle and bevelling the edges at an angle of about 15°.
2. Clean and degrease the pipe and sleeve using Würth PVC cleaner art. no. 0892100104.
3. Apply TIXPRO PVC ADHESIVE with a brush axially from the inside out, forming a thin layer first on the sleeve and then on the pipe.
4. Insert the two parts immediately without turning them and within 3 minutes of applying the adhesive.
5. Keep stationary for 30 seconds until TIXPRO PVC ADHESIVE develops the initial bond.
6. Remove any excess adhesive.
Do not move the joint for the next 5 minutes. For temperatures below 10°C, increase the waiting time to at least 15 minutes.
Weight of content | 115 g |
Chemical basis | Vinyl chloride polymer |
Colour | Light yellow transparent |
Density/conditions | 0.92 g/cm³ / at 20°C |
Viscosity | 9 Pas |
Viscosity conditions | at 20°C |
Max. short-term temperature resistance | 50 °C |
Min. flashing point | 21 °C |
Min./max. functional strength | 0.041666666666666666666666666667-24 d |
Max. functional strength | 24 d |
Shelf life from production/conditions | 24 Month / cool and dry storage area, 5°C to 25°C |
Contents | 125 ml |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Twist drill DIN 340 HSS type RN
Precision screwdriver, flat slotted
Pan head tapping screw shape C with H recessed head DIN 7981, A2 stainless steel, shape C, with tip
Tiomos comfort marking gauge
CLL-A universal bracket
Extractor hood WSA 125 for angle grinders
Reinforced rubber hose For one-handed, two-handed grease gun and lever grease gun
Tile levelling rod
Safety outlet 3 socket
Permanent deep-hole marker with cap