Surface primer RECUPRIMER
Surface primer RECUPRIMER
PRIM-ACRYLLAC-RECUPRIMER-WHITE-5KG
Register now and access more than 125,000 products
Properties
- Resistant to the alkalinity of cementitious surfaces.
- Adhesive sealant for waterproofing coatings.
- Breathable.
- Excellent adhesion on non-porous and hard surfaces: cement, concrete, grating, ceramics, lime and cement mortar, stone etc.
- Prevents moisture from appearing on cementitious or stone surfaces.
- Protects against surface breakdown.
- Ready to use
Output
Based on surface porosity of 3-6 m2 per kilo.
These data are only recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.
Datasheets(X)
Adhesion and sealing pre-coat on light porous cementitious surfaces in waterproofing systems with: RECUFLEXIM and RECULASTIC
Supplied ready to use.
The surfaces must be clean, dry and free from grease, algae, lichen or loose material residue.
Applied with a brush or roller. Does not drip.
Only one coat is applied when used as a sealant for the waterproofing process.
Do not apply the product in adverse weather conditions (rain, snow etc.).
Do not use on metals, aluminium, galvanised sheet metal or wood.
Method of applying a waterproofing paint
The surface must be clean and dry, and free from algae, lichen or poorly adhered materials. Particularly suitable for low-porous surfaces.
Apply a coat of Recuprimer (art. no. 0893199800) with a brush or roller. This product creates a bond with any successive coats.
Once the Recuprimer is dry, a coat of Recuflexim is applied
A waterproofing mesh can be applied when applying the first coat of Recuflexim. This mesh AR01_0818900207961____1 lets you increase the strength of the coating.
Apply the second coat of Recuflexim (crossed in the other direction) to ensure that the entire surface is waterproofed.
Once dry, apply the last coat with Reculastic, art. no. 0893 199 80. The surface can now be walked on.
Weight of content | 5 kg |
Shelf life from production | 24 Month |
| Technical data | |
| Composition | Acrylic resins in solvent and cementitious additives |
| Density | 1.40 (+/- 0.03) kg/litre |
| Viscosity | Average |
| Appearance | Non-slip matte white |
| Solid content | 62 % |
| Application temperature | Between 5°C and 40°C |
| Type of thinner | Universal solvent. Maximum 10 % |
| Dry to touch | 2 hours |
| Completely dry | 5 to 6 hours |
| Paintable | 3 hours |
| Output | 3-6 m2 /kg |
Last viewed
Carbon electrode
Lever for manual riveter
Screwdriver slotted short with round shank
Handle
Glow plug tool set for Renault M10x1 Renault 35 pieces
Turnbuckle closed form DIN 1478, zinc-plated steel
Precision screwdriver, flat slotted
NP profile double cylinder In 6-pin system
Fleece sanding belt For electric grinding file
Cover cap, AW drive For D-anchors