Surface primer RECUPRIMER
Surface primer RECUPRIMER
PRIM-ACRYLLAC-RECUPRIMER-WHITE-5KG
Register now and access more than 125,000 products
Properties
- Resistant to the alkalinity of cementitious surfaces.
- Adhesive sealant for waterproofing coatings.
- Breathable.
- Excellent adhesion on non-porous and hard surfaces: cement, concrete, grating, ceramics, lime and cement mortar, stone etc.
- Prevents moisture from appearing on cementitious or stone surfaces.
- Protects against surface breakdown.
- Ready to use
Output
Based on surface porosity of 3-6 m2 per kilo.
These data are only recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.
Datasheets(X)
Adhesion and sealing pre-coat on light porous cementitious surfaces in waterproofing systems with: RECUFLEXIM and RECULASTIC
Supplied ready to use.
The surfaces must be clean, dry and free from grease, algae, lichen or loose material residue.
Applied with a brush or roller. Does not drip.
Only one coat is applied when used as a sealant for the waterproofing process.
Do not apply the product in adverse weather conditions (rain, snow etc.).
Do not use on metals, aluminium, galvanised sheet metal or wood.
Method of applying a waterproofing paint
The surface must be clean and dry, and free from algae, lichen or poorly adhered materials. Particularly suitable for low-porous surfaces.
Apply a coat of Recuprimer (art. no. 0893199800) with a brush or roller. This product creates a bond with any successive coats.
Once the Recuprimer is dry, a coat of Recuflexim is applied
A waterproofing mesh can be applied when applying the first coat of Recuflexim. This mesh AR01_0818900207961____1 lets you increase the strength of the coating.
Apply the second coat of Recuflexim (crossed in the other direction) to ensure that the entire surface is waterproofed.
Once dry, apply the last coat with Reculastic, art. no. 0893 199 80. The surface can now be walked on.
Weight of content | 5 kg |
Shelf life from production | 24 Month |
Last viewed
Metric combination wrench with POWERDRIV®
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
HDPE fold masker
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
TX double box-end wrench
Wire end ferrule with plastic sleeve strips
Universal holder E 6.3 (1/4") With adjustable length of thread engagement and permanent magnet
Spacer disc
Twist drill bit HSCo DIN 338 type RN oxide
Hexagonal bolt with shank ISO 4014, A4-50 and A4-70 stainless steel, plain