Support clip, type BD
Support clip, type BD
SPRTCLIP-BD-RIM-(HDG)-M16
Register now and access more than 125,000 products
Features a flat surface, so that a nut or head of a bolt can be fully tightened
The support clip is used for mounting at edges. It grips around the flange edges of profiles and supports.
Support clip is not suitable for transverse loads!
Recommended tensile load
Values apply to a clamped connection (4 bolts), with loading in direction of screw axis.
Datasheets(X)
CAD data (available after login)
 | |
Suitable for screw (d1) | M16 |
Distance (c1) | 8 mm |
Min. grip width (c1) | 8 mm |
Distance from end of terminal to the middle of the drill hole (b1) | 17 mm |
Width (b2) | 41 mm |
Height (h1) | 17 mm |
Cam height (h2) | 17 mm |
Material | Spheroidal graphite iron |
RoHS-compliant | Yes |
Surface | Hot dip galvanized |
Tightening torque | 75 Nm |
Recommended tensile load | 30 kN |
Type description | BD |
Other standard | WN 485-2 |
Last viewed
TX bit with hole
Slotted countersunk head screw DIN 963, brass, plain
Wire end ferrule with plastic sleeve
Polishing pads
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Impact drill bit with straight shank for granite
Sheet metal nut, type 9
Holder For 12 mm, 20 mm and 30 mm countersinks
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
Ash handle