Superglue with brush
Superglue with brush
SUPGLU-BRUSH-8G
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
Cyanoacrylate glue that is easy to apply in hard-to-reach areas
Features
- Medium-viscosity adhesive.
- Solvent-free.
- Bonds with high tensile strength in very short spaces of time.
- For joining all types of metals such as steel, aluminium, zinc and other alloys.
- Adheres to synthetic materials such as hard PVC, porexpan, natural rubber, hardened paper, wood, stone, glass, marble and ABS+PC.
- Resistant to petrol and alcohol after 7 days of application.
Advantages
- Fast bonding in contact with a wide variety of materials.
- Easy, clean and precise application of the glue.
- Does not produce vapours when drying.
Benefits
- Thanks to the brush and its high viscosity, it can bond hard-to-reach areas without dripping.
Product information
Datasheets(X)
Technical data | Uncured material properties |
Chemical base | Ethyl cyanoacrylate |
Viscosity at 25ºC | 0-120 mPa s |
Specific weight | Approx. 1.05 g/ml |
Flash point | >81ºC |
Properties of cured material (24 h, at 23ºC and 55 % RH) | ||
Filling capacity | 0.07 mm | |
Temperature range | -54 to +82ºC | |
Drying time | Balsa wood | <10 s |
Oak | 120-180 s | |
Nitrile | <5 s | |
Neoprene | 5 s | |
EPDM | <7 s | |
Steel | 10-20 s | |
PVC | 5-10 s | |
Polycarbonate | 10-40 s | |
Shear strength | Shot-blasted steel | 10 N/mm2 |
Aluminium | 11 N/mm2 | |
Nitrile rubber | 10 N/mm2 | |
Polycarbonate | 20 N/mm2 | |
Tensile strength | Shot-blasted steel | 5 N/mm2 |
Nitrile rubber | 5 N/mm2 | |
Neoprene rubber | 5 N/mm2 | |
Polycarbonate | 12 N/mm2 |