Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
DIN 7 h8, plain steel
PIN-CYL-DIN7-UNHDND-H8-5X20
Register now and access more than 125,000 products
DIN 7 was withdrawn and superseded by DIN EN ISO 2338 (changes made to length definition and dome heights).
Datasheets(X)
CAD data (available after login)
 | |
Nominal diameter (d1) | 5 mm |
Length (l1) | 20 mm |
Height of flat point (c) | 0.75 mm |
Standards | DIN 7 |
Material | Steel |
Surface | Plain |
Design | Unhardened |
Tolerance class | h8 |
RoHS-compliant | Yes |
Last viewed
C 6.3 slotted bit (1/4 inch)
Hot air blower HLG 2300-E POWER
Gypsum plasterboard anchor W-GS type K with reinforced centring point
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
Universal holder E 6.3 (1/4") With adjustable length of thread engagement and permanent magnet
Cleaning kit for spray gun ESENCIAL/ADVANCE
VDE wire stripping pliers, IEC 60900
Spring spiral fixing tool, universal The new spring coil fixing tool fixes the spring directly to the clamping jaw, thereby preventing the spring unscrewing during the clamping process
Transport module with wheels
Dispenser