Straight connector For central lubrication units
Straight connector
FITT-CLS-FITTING-STRAIGHT-CON-D4MM
Register now and access more than 125,000 products
- The screw-in threads are tapered and thus self-sealing.
- The size of screw-in thread depends on the lubrication point/manifold point.
The connectors for 4-mm and 6-mm pipe diameters are suitable for use in the low-pressure range only.
Datasheets(X)
For the repair of a defective line
 | |
Suitable for hose external diameter | 4 mm |
Width across flats (SW) | 9 mm |
Width across flats 2 (SW2) | 10 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
Gas filter ABEK1 For breathing protection series 175
Hook and loop support plate
Twist drill DIN 340 HSS type RN
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Standard cable tie with plastic latch
Collated nails and gas cartridge NG CS-2/3
AT 48 RD automatic door seal
1/4-inch bit drill holder
Fleece sanding belt For electric grinding file
Exhaust slotted nut, reduced wrench size DIN 14441 heavily copper-plated steel