Straight connection piece For hard-to-reach lubrication and manifold points
Connection piece straight
FITT-CLS-CONPIECE-M10X1TAP-M10X1-23MM
Register now and access more than 125,000 products
On central low-viscosity grease lubrication units:
Lines with a diameter of 4 mm are connected to connection pieces with tapered rings and union bolts M8x1.
On central grease lubrication units:
Lines with a diameter of 6 mm are connected to connection pieces with double-tapered rings and union bolts M10x1.
Datasheets(X)
For extension if the lubrication or support point is recessed.
 | |
Connection thread (d2) | M10 x 1 |
Outlet thread (d) | M10 x 1 tapered |
Width across flats (SW) | 13 mm |
Length (L) | 23 mm |
Material | Steel |
Surface | Zinc plated |
Last viewed
TX screwdriver with round shank
Automatic test lamp
Lambswool polishing pad, white
1/4" socket wrench insert PH
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 8.8, zinc-plated, blue passivated (A2K)
Knurled thumb screw Made from polyamide
Longlife grinding disc For stainless steel
Metric combination wrench with POWERDRIV®
Cable clip with nail plug 6 x 50 mm
Twist drill bit HSS DIN 338 type RN 118°