Steel door solid spindle 8 mm with M8 thread
Steel door spindle f. nylon door handle dia. 23 mm
CHPIN-F.DRFRN-NYLON-THR8-D23-8X100
Register now and access more than 125,000 products
- The steel door spindles are used to connect the knob, button and door handle
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these steel door spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer steel door spindles.
Dimensions subject to change. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw with ring cutter (DIN 916) presses this against the spindle.
 | |
Suitable for door handle | DH Polyamide |
Material | Steel |
Surface | Zinc plated |
Suitable for min./max. door thickness | 60-75 mm |
Length (L) | 100 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
Twist drill bit HSCo DIN 338 type RN bronze point thinning
2C plastic adhesive Replast® ME 90 sec.
Angle grinder protective panel on both sides WSH 230
Straight pin with flat points DIN 7, steel plain (9 SMnPb 28 k or St 50 K), unhardened, tolerance class h8
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Tetrahedral warning sign "Dangerous electrical voltage" With magnetic base
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Zinc clip-on wheel weight For car steel rims
3/8" adapter With 3/8-inch square socket and 10 mm hexagon socket
VARIFIX® flat hinge connector with slot