Stand-off installation system AMO®-Therm
Adapter ATA spacer installation system AMO-Therm
ADAPT-AMOTHERM-ATA-SET-ANC-M12/M16
Register now and access more than 125,000 products
Quick and easy to install.
Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate
The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside.
Secure attachment with approval for high loads in a wide range of building materials
When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200
Usable lengths from 80 to 300 mm can be covered with an AMO-Therm
Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1
Datasheets(X)
CAD data (available after login)
Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades
e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens etc.
Can be used in different building materials
Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick
Can be used outdoors, in humid areas and close to the sea
External parts made from stainless steel.
Suitable for cotter-pin installation
Connection thread (1) | M12 |
Material of connection thread (2) | Stainless steel A4 |
Diameter threaded rod (3) | M16 |
Length (5) | 80 mm |
Last viewed
Tavinea Optima divider profile For Vionaro/Nova Pro Scala
Replacement nozzles For pressure sprayers
Sleeves
Fuse holder For flat blade fuses ATO
Universal air-conditioning valve assortment 71 pieces in system case
Crimping jaws for crimping pliers B12
1/2 inch impact socket wrench insert hexagon, metric, short
Sandpaper strip Useit® Superpad vehicle
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
WÜPLAST® countersunk head screw with Z Phillips head WN 1413, steel 10.9, zinc-plated, transparent passivated (A3K)