Stand-off installation system AMO<SUP>®</SUP>-Max plastic sleeve - SLEV-AMOMAX-PLA-8,2MM

Stand-off installation system AMO<SUP>®</SUP>-Max plastic sleeve - SLEV-AMOMAX-PLA-8,2MM - 1

Stand-off installation system AMO<SUP>®</SUP>-Max plastic sleeve - SLEV-AMOMAX-PLA-8,2MM - 2

Stand-off installation system AMO<SUP>®</SUP>-Max plastic sleeve - SLEV-AMOMAX-PLA-8,2MM - 3

Stand-off installation system AMO^®-Max plastic sleeve

Name: Stand-off installation system AMO ® -Max plastic sleeve
Brand: Würth
SKU: 0911111008

AMO-Max plastic sleeve
SLEV-AMOMAX-PLA-8,2MM

Art.-no. 0911111008

EAN 4038898385912

All versions

Individual price display after login

Stand-off installation system AMO^®-Max plastic sleeve

Art.-no. 0911111008

Individual price display after login

Quantity

x 25 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Enables centring of the anchor/anchor rod used in the Amo^®-Max spacer

For universal use, as combinable with various anchor systems depending on substrate

Flexible adjustment of mounting height with different spacing disks

For use in cotter-pin installation

The AMO-Max system can be disassembled.

Made of glass-fibre reinforced plastic (polyamide PA6)

Impact-resistant, abrasion resistant and vibration damping

Good resistance to oils and greases

Resistant to rotting, weathering and ageing

Temperature resistant from -30°C to +100°C

Proof of Performance

Test reports 031-02 and 05-141

Application area

Instructions

1. Pre-drill external thermal insulation composite system (without impact)

2. Drill centre drill hole into the substrate

3. Produce a drill hole suitable for the substrate and anchoring element

Insert the reset pin and then install the spacer

Drive in the spacer using the impact sleeve

Remove setting mandrel

1. Set fastening element (e.g. anchor rod) in place

2. Fit spacer and plastic sleeve

Fix and install attachment (in accordance with the installation instructions for the mounting element)

Pre-drill the ETICS without hammer action, produce the centring hole, produce the drill hole according to the substrate and anchoring element

Inserting the mounting mandrel, attaching the AMO-Max spacer

Drive in the Amo-Max spacer using a ferrule

Pull out the mounting mandrel, place the anchor element

Install the spacer(s) and plastic sleeve

Fix and mount the attachment part according to the set-up instructions of the selected one Anchor Elements

Test reports 031-02 and 05-141

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Can be used in various substrates

e.g. standard and lightweight concrete, solid and cavity brick, solid and hollow sand-lime brick

Suitable for attaching

canopies, light wells, lighting equipment, post box systems, metal structures, metal profiles, brackets, grids, wooden structures, beams, cable racks etc.

Can be used outdoors, in wet rooms and in coastal areas

ensuring compliance with approval for fastening system

Material	PA - Polyamide
Internal diameter (Ø)	8.2 mm

Additive article:

Product

Description

Quantity

Price
/PU

Carbide hole saw for Amo<SUP>®</SUP>-Max

Carbide hole saw for Amo®-Max

SAW-HO-TC-AMOMAX-D41MM

Art.-no. 0632100400

x 1 pcs

Setting mandrel

STGMNDRL-F.AMOMAX-1-10/14/16

Art.-no. 0911112001

Impact tool for mounting the Amo^®-Max system

x 1 pcs

Setting mandrel

STGMNDRL-F.AMOMAX-2-8/12/18

Art.-no. 0911112002

Impact tool for mounting the Amo^®-Max system

x 1 pcs

Setting mandrel

STGMNDRL-F.AMOMAX-3-12/16/18

Art.-no. 0911112003

Impact tool for mounting the Amo^®-Max system

x 1 pcs

Impact sleeve

IMPSLEV-F.AMOMAX

Art.-no. 0911112004

Impact tool for the installation of the AMO®-Max system

x 1 pcs

Hole saw mount

HOSAWMNT-F.AMOMAX-8

Art.-no. 0911112008

For the clean removal of the plaster layer when installing the Amo®-Max system

x 1 pcs

Hole saw mount

HOSAWMNT-F.AMOMAX-10

Art.-no. 0911112010

For the clean removal of the plaster layer when installing the Amo®-Max system

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).