Welcome to Würth Canarias For trade customers only
Stainless steel restorer ROSTCLIN - RUSTFLMREM-SET-F.SST-4PCS

Stainless steel restorer ROSTCLIN

Rust remover stainless steel ROSTCLIN set 4 pcs
RUSTFLMREM-SET-F.SST-4PCS

Art.-no. 0893982000
EAN 4053479897363
All versions
Prices for customers after login
Stainless steel restorer ROSTCLIN

Art.-no. 0893982000

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The ROSTCLIN KIT removes rust produced by weathering, restores surfaces and passivates stainless steel surfaces

Features


  • ROSTCLIN is an effective product, passivating the surface and removing the rust produced by weathering on different types of stainless steel.

  • The wipes allow access to areas with high levels of oxidisation and therefore make cleaning much more effective.

  • The restorer then passivates the surface to protect it from deterioration.


Advantages


  • Very simple and practical application.

  • Removes rust without the need for tools.

  • Ready-to-use product with a formulation optimised for application.

  • Suitable for any satin, polished or mirror-polished finish.


Benefits


  • Using with a wipe makes it easier to clean the surface.

  • Saves a lot of labour.

  • Does not require machines such as grinders, polishers etc.

  • The kit ensures that you have everything you need for restoring stainless steel.

These data are only recommendations based on our experience. Testing prior to use is recommended. For more information, see the product data sheet.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For removing rust from stainless steel without cratering. Cleans, restores and passivates stainless steel on windows, doors, urban and hospitality furniture, pipes in production plants, places highly susceptible to oxidation such as indoor swimming pools, salty environments (coastal areas), railings on recreational boats.

Instructions

1. Wear goggles, protective gloves and a mask.


2. Clean the affected areas by rubbing them lightly using the ROSTCLIN eliminator wipe. For large areas, perform cleaning in sections to prevent the product from remaining on the stainless steel for a long time - between 5 and 15 minutes maximum.


3. Then apply the restorer by spraying the surface before removing the excess product with a cloth.

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Stainless steel restorer ROSTCLIN
Stainless steel restorer ROSTCLIN

RUSTFLMREM-ROSTCLIN-WIPES-15X20CM-100PCS

ROSTCLIN removes rust produced by weathering, restores surfaces and passivates stainless steel surfaces
x 1 pcs
Stainless steel restorer ROSTCLIN
Stainless steel restorer ROSTCLIN

RUSTFLMREM-PROT-ROSTCLIN-SPRAY-1LTR

ROSTCLIN removes rust produced by weathering, restores surfaces and passivates stainless steel surfaces
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Cleaning paper roll Plus Blue
Cleaning paper roll Plus Blue

CLNPAP-ROLL-3PLIES-BLUE-L38XW24CM-900SHT

Triple-ply blue cleaning paper.
x 2 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details