Square wedge-shaped washer DIN 434, steel, hot-dip galvanised, wedged-shaped, for U section
DIN 434 steel hot galvanized for U-beam
WSH-WDGE-DIN434-(HDG)-D11,0MM-F.M10
Register now and access more than 125,000 products
Two rolled-in grooves to identify the pitch 8 (+/- 5)% on the surface
Datasheets(X)
CAD data (available after login)
Wedge washers for U-sections, for screw connections up to strength class 5.6
 | |
Suitable for screw thread | M10 |
Internal diameter (d1) | 11 mm |
Length (a1) | 22 mm |
Width (b1) | 22 mm |
Thickness (h1) | 3.8 mm |
Standards | DIN 434 |
Material | Steel |
Surface | Hot dip galvanized |
Tilting | 8 % |
Suitable for | U section |
RoHS-compliant | Yes |
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc-plated blue passivated (A2K)
Shim ring DIN 988, steel, plain
Shaft head screw
Cylinder saw, HSS bimetal Longlife & Speed HSCo8
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
Floor nozzle
Edge protection angle Made of plastic
Countersunk tapping screw, shape C with hexalobular drive ISO 14586, steel, zinc-plated, blue passivated, shape C (with tip)
Impact insert
Socket contact 2.5 Uninsulated with four locking lugs