Square split spindle 8 mm notched on two sides
Square end expanding pin
SQUARPIN-F.DRFRN-ST-(ZN)-8X110MM
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw expands the pin/spindle.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 110 mm |
Square size | 8 mm |
DIN direction | DIN R/L |
Last viewed
ASSY® 4 CSMP universal screw Steel zinc plated partial thread countersunk milling pocket head
Nozzle for HES 510
Hammer drill bit Max Quadro-L Vario
Pull handle ST/A100
A 105 door handle
Sanding discs ProLine
Centre drill bit For hammer core drill bit
Screwdriver TX 3C handle with round shank
1/4-inch and metric ratcheting double box-end wrench For hexagon drive
O-ring, imperial NBR 70