Square split spindle 10 mm offset on both sides to 8 mm
Square solid pin
SQUAR-SPIN-DRFRN-ST-OFFSET-10/8X125
Register now and access more than 125,000 products
- These square spindles can be used to install two door handles with an 8 mm square on a house door
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Screwing in the grub screw expands the spindle in the handle.
 | |
Material | Steel |
Surface | Zinc plated |
DIN direction | DIN R/L |
Square size | 8 mm/10 mm/8 mm |
Length (L) | 125 mm |
Last viewed
Cordless drywall screwdriver ATS 18 AUTOMATIC M-CUBE
Bond + Seal structural adhesive
Cordless drill driver ABS 18 BASIC M-CUBE
VDE 1/2 inch insulated socket wrench Metric, hexagon, short
1/4 inch socket wrench insert, metric short
Wiggle wire
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
Circlip pliers, shape C For bore circlips
Hexagonal bolt with shank ISO 4014, steel 10.9, zinc-plated, blue passivated (A2K)
Adapter A4 With centre drill bit