Square spindle 9 mm with eccentric drill hole
Square pin with front-end bore
SQUARPIN-F.DRFRN-W.BR-ST-(ZN)-9X85MM
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
The grub screw drills a hole in the square spindle, no slipping.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 85 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Last viewed
Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
High-temperature silicone
WLH 1 Premium cordless LED hand-held lamp
LED built-in light For recessed installation
Classic Bermuda work shorts
Impact sleeve
TIME-SERT® threaded bushing
1/2 inch and 1/4 inch socket wrenches Assortment of 56 pieces
Brake fluid tester
Hose clamp A4 with asymmetrical lock made entirely of stainless steel