Square solid spindle 9 mm
Square solid spindle FS
SQUAR-SPIN-F.DRFRN-ST-(ZN)-9X125MM
Register now and access more than 125,000 products
- The square spindles are used to connect two door handles on a fire or noise protection door
- This connection element moves the safety catch
- Due to different door thicknesses and penetration depths in the door handles, these spindles are required in different lengths
Please note that the fastening screws for the metal fittings must also be changed when using shorter or longer square spindles.
Dimensions subject to change. Subject to technical changes!
Screwing in the grub screw with ring cutter (DIN 916) presses this against the spindle.
 | |
Material | Steel |
Surface | Zinc plated |
Length (L) | 125 mm |
Square size | 9 mm |
DIN direction | DIN R/L |
Datasheets(X)
Last viewed
Crimping pliers For twisted contacts
Particle board screw Wüpofast ® 2.0
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hexagon nut, low profile with fine thread ISO 8675, A2/035 stainless steel
FLEXEN® universal bend With self-seal technology
Support clip type SRZ
Support clip type SRZ Open design
Hexagonal cap nut with clamping piece (non-metallic insert) DIN 986, A2 stainless steel, plain
Nail anchor SHARK® Hammer TYPE SK
Flat washer For hexagon head bolts and nuts
