Spring lock washer, shape A DIN 137, spring steel, mechanically applied zinc coating, shape A, curved
DIN 137 steel mech. applied zinc coating shape A
WSH-SPG-DIN137-A-(MZN)-D2,4
Register now and access more than 125,000 products
Spring lock washers are spring-loaded fastening elements that operate via an axial spring system.
Type A, curved
Datasheets(X)
 | |
Suitable for screw thread | M2 |
Internal diameter (d1) | 2.4 mm |
Outer diameter (d2) | 4.5 mm |
Height (h1) | 1 mm |
Thickness (s1) | 0.3 mm |
Material | Spring steel |
Surface | Zinc plated |
Design | Domed |
DIN | 137 |
Last viewed
Adapter A4 With centre drill bit
Zinc adhesive weight For cars
Circlip pliers, shape A for shaft circlips
ASSY®plus blue zinc-plated chipboard screw
Cable tie KBL 1 made of polyamide with plastic tongue
Lashing strap with clamping lock and fitting
Hammer drill bit cassette with SDS and Duo-S Vario drive arbor Seven pieces
Screwless hose clamp low overall height
Vulcanising cement
1/2-inch T-handle