Welcome to Würth Canarias For trade customers only
Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM
Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM - 1
Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM - 2
Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM - 3
Spot weld cutter For pneumatic tools solid carbide Multi Performance - CTR-SPTWELD-SC-4CUTEDGE-8X44MM - 4

Spot weld cutter For pneumatic tools solid carbide Multi Performance

Solid carbide spot weld cutter w. 4 cutters Magma
CTR-SPTWELD-SC-4CUTEDGE-8X44MM
ZEBRA

Art.-no. 0710189080
EAN 4061975386212
All versions
Prices for customers after login
Spot weld cutter For pneumatic tools solid carbide Multi Performance

Art.-no. 0710189080

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

The universal high-performance spot weld drill bit for loosening spot welds with pneumatic machines (e.g. Vario drill, expanding nail, etc.) on all body sheeting incl. ultra high-strength components (BTR, BOR, etc.) on all kinds of vehicles, e.g. on A-pillars, B-pillars, sills, etc.

Tool geometry with four cutting edges for the most demanding work without compromise



Extremely high cutting performance


Up to 100 % faster compared to conventional SC spot-weld drill bits with three cutting edges



Extremely durable


Up to 100 % longer service life compared to conventional SC spot-weld drill bits



Extremely robust


Significantly fewer brittle centring tips compared to conventional SC spot-weld drill bits



Extremely comfortable


Optimal milling behaviour due to very good centring on the spot weld



Magma multi-layer coating


  • High oxidation and thermal stability (operating temperature up to 800 °C)

  • Very hard and wear-resistant (hardness approx. 3,500 HV)

  • Up to 9x longer service life compared to uncoated spot-weld drill bits

  • Up to 2x longer service life compared to conventional coatings, e.g. TiN


Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • Optimised cutting geometry specially adapted to use with the Vario drill by Wieländer+Schill with ultra high-strength body steels (recommended rotation speed: 900 rpm)

  • For drilling all steel plates including ultra high-strength components (BTR, BOR, etc.) to 1500 N/mm2, cast iron, stainless steel sheeting, brass sheeting, aluminium sheeting, zinc sheeting, copper sheeting, bronze sheeting and plastic panels.
Instructions
  • The solid carbide material is extremely hard, making it very brittle and prone to breaking if not handled correctly.

  • Position the cutter precisely and at a right angle. Position the cutter in the centre first, then cut applying even contact pressure.

  • Avoid hard attachment as well as lateral impacts and dropping of the cutter under all circumstances

  • Use coolants/lubricants if possible

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details