Spot weld cutter For pneumatic tools solid carbide Multi Performance

Name: Spot weld cutter For pneumatic tools solid carbide Multi Performance
Brand: Würth
SKU: 0710189060

SC spot-weld drill bit with 4 cutting edges Magma
CTR-SPTWELD-SC-4CUTEDGE-6X44MM
ZEBRA

Art.-no. 0710189060

EAN 4061975386205

All versions

Specification

The universal high-performance spot weld drill bit for loosening spot welds with pneumatic machines (e.g. Vario drill, expanding nail, etc.) on all body sheeting incl. ultra high-strength components (BTR, BOR, etc.) on all kinds of vehicles, e.g. on A-pillars, B-pillars, sills, etc.

Tool geometry with four cutting edges for the most demanding work without compromise

Extremely high cutting performance

Up to 100 % faster compared to conventional SC spot-weld drill bits with three cutting edges

Extremely durable

Up to 100 % longer service life compared to conventional SC spot-weld drill bits

Extremely robust

Significantly fewer brittle centring tips compared to conventional SC spot-weld drill bits

Extremely comfortable

Optimal milling behaviour due to very good centring on the spot weld

Magma multi-layer coating

High oxidation and thermal stability (operating temperature up to 800 °C)

Very hard and wear-resistant (hardness approx. 3,500 HV)

Up to 9x longer service life compared to uncoated spot-weld drill bits

Up to 2x longer service life compared to conventional coatings, e.g. TiN

Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable

Application

Application area

Optimised cutting geometry specially adapted to use with the Vario drill by Wieländer+Schill with ultra high-strength body steels (recommended rotation speed: 900 rpm)

For drilling all steel plates including ultra high-strength components (BTR, BOR, etc.) to 1500 N/mm², cast iron, stainless steel sheeting, brass sheeting, aluminium sheeting, zinc sheeting, copper sheeting, bronze sheeting and plastic panels.

Instructions

The solid carbide material is extremely hard, making it very brittle and prone to breaking if not handled correctly.

Position the cutter precisely and at a right angle. Position the cutter in the centre first, then cut applying even contact pressure.

Avoid hard attachment as well as lateral impacts and dropping of the cutter under all circumstances

Use coolants/lubricants if possible

Documents

Product information

Datasheets (0)

Certificates/ Documents (0)

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

x 6 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).