Split pin ISO/WN 1234 steel zinc-plated
ISO/WN 1234 zinc plated steel
SPLTPIN-ISO1234-(A2K)-6,3X71
Register now and access more than 125,000 products
Nominal size d1 = 3.5 mm/4.5 mm/5.5 mm/7 mm not standardised according to ISO 1234
Replaces DIN 94
Datasheets(X)
 | |
Diamètre nominal (d1) | 6.3 mm |
Länge (l1) | 71 mm |
Longitudinal external diameter of ring (b) | 12.60 mm |
Transverse external diameter of ring (c) | 11.80 mm |
Length between two pins of a splint (a) | 4.00 mm |
Normes | ISO 1234 |
Matière | Steel |
Finition | Zinc plated |
Conforme à la norme RoHS | Yes |
Last viewed
Straight metric VDE single open-end wrench
Heat shrink hose, medium-walled
Aluminium clamping rods
Voltage tester Test Plus
Pressure regulator With integrated hose failure safety device
Hand nozzle For AMTS
Sheet metal nut Bottom section, quick-release mount
Collated nails and gas cartridge NG CS-2/3
Empty case For MH 10-SE chipping hammer
3/8-inch socket wrench insert, metric long