Speed lamella flap disc
Lamella flap disc Speed
FLPDISC-SP-A2-ZCS-CLTH-DOMED-G80-D125
ZEBRA
Register now and access more than 125,000 products
Free of iron, chlorine and sulphur (≤0.1%)
High-performance abrasive cloth with additional grinding-active coating layer (Topsize coating)
Robust glass fabric backing disc
In comparison to conventional segmented discs:
- Very high material removal
- Finer and more uniform surface quality
High-performance abrasive cloth (zirconia alumina with grinding-active topcoat)
- Long service life
- Extremely high rate of material removal
- Extremely cool grinding
- No material discolouration
- Ideal for machining stainless steel
- Used for grinding surfaces and edges, dressing and smoothing, deburring and for weld seam machining
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Rasterstorlek | 80 |
Design | Domed |
Material of carrier disc | Glass fabric |
Max. rotation speed | 12250 rpm |
Max. recommended rotation speed | 7500 rpm |
Material av nötande medel | Zirconium conrundum |
Datasheets(X)
Last viewed
Metric double open-end wrench DIN 3110/ISO 1085
Hammer drill H 22-SLE
Threaded pin ISO 4027, steel, 45H, plain
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, steel 8.8, plain
1/2-inch impact socket wrench insert hexagon, metric, long
Film knife With specially coated blade
Stainless steel care oil
Hand tap, second tap HSS DIN 352
USB car charger, 2.4 A
1/4 inch socket wrench insert, metric short
