Slotted set screw with tip DIN 553, steel, 14H, zinc-plated, blue passivated (A2K)
DIN 553 steel 14H zinc plated
SCR-CONEPT-DIN553-14H-SL-(A2K)-M8X10
Register now and access more than 125,000 products
Hardness class 14H corresponds to a hardness of 450 HV
Steel set screws are intended for use under compressive stress only (see also DIN EN ISO 898-5). Typical uses include clamping in an adjusting ring or applying pressure to a counterpart. Steel set screws are therefore extremely hard in order to ensure torsional strength in the hexagon socket during tightening/loosening.
Tip:
A2/A4 stainless steel set screws are not specially hardened and may be used for tensile loads.
DIN 553 has been withdrawn and replaced by ISO 7434. There is some similarity (nominal diameter for M1, M1.4 removed).
Datasheets(X)
CAD data (available after login)
Last viewed
File handle
30 % diluted, inorganic radiator anti-freeze BIKELINE
Lashing plate, aluminium
Threaded rod DIN 976-1, polyamide PA 6.6
Sandpaper strip Useit® Superpad vehicle
3/4-inch impact socket wrench insert hexagon, metric, short
Grinding disc Würth Line
Cutting disc, carbide-tipped
Waterproof elastic coating suitable for foot traffic RECULASTIC
Shim ring WN 988 A2 stainless steel plain