Slotted set screw with pin DIN 417, steel, 14H, plain
DIN 417 steel 14H plain
SCR-DOGPT-DIN417-14H-SL-M4X8
Register now and access more than 125,000 products
DIN 417 has been withdrawn and replaced by EN 27435. There is some similarity (no application-relevant changes).
Datasheets(X)
CAD data (available after login)
 | |
Thread type x nominal diameter (d1) | M4 |
Length (l1) | 8 mm |
Diameter of tenon (d2) | 2.5 mm |
Length of tenon (l2) | 2 mm |
Slot width (n1) | 0.6 mm |
Standards | DIN 417 |
Material | Steel |
Hardness category | 14H |
Surface | Plain |
RoHS-compliant | Yes |
Head type | Without head |
Drive type | Slot |
Internal drive | Slot |
Thread type | Metric thread |
Pitch | 0.7 mm |
Thread form | Standard metric thread |
Thread design | Full thread |
Last viewed
H121 Drawer slidebox Slender Metal Drawer
Knife blade, L-shaped, toothed
Guide drill bit A014C For adapter A2
1/2 inch impact socket wrench insert hexagon, metric, short
Lock for HDPE service case
PU pneumatic spiral hose set 2000 series
Lithium button cell 3 V
Start Up jacket Würth 2023
Collated nails and gas cartridge NG CS-2/3 HFB
Hand tap, second tap HSS DIN 352