Slim clamping lever with female thread
Clamping lever, brass, female thread, slim
CLMPLEVR-IT-BRS-M4X50
Register now and access more than 125,000 products
- For safe and optimum loosening for almost every clamping task
Datasheets(X)
Clamp levers are used when the clamping area is limited or a particular tension setting is desired. The thread insert is connected to the handle with a serrated edge and can be removed.
By lifting (pulling) the grip, the serration is freed and the clamp lever can be moved to the appropriate clamping position. On “letting go”, the grip clicks back into place automatically.
 | |
Material of handle | PA reinforced - Polyamide reinforced |
Material of screwing thread | Brass |
Surface of the screwing thread | Plain |
RoHS-compliant | Yes |
Design | Slender |
Thread type x nominal diameter (d1) | M4 |
Shank diameter (d2) | 12 mm |
Head diameter (dk) | 16 mm |
Length of lever (l1) | 50 mm |
Height (h1) | 34.9 mm |
Head height (k) | 26.5 mm |
Radius (r1) | 42 mm |
Colour | Black |
Product weight (per item) | 11.400 g |
Thread type | Metric thread |
Last viewed
Tool holder With 1/4 inch and hexagon drive
Plastic end cap, square For square pipes
Soft lead-free electronic solder no. 1 RoHS-compliant
Plastic clip, double
Hydraulic nut splitter
3/8-inch socket wrench insert, metric long
Ducting clamp Part 1 – Light series
Circlip for bore hole, standard version, shape J DIN 472 for bore holes, spring steel, phosphated and oiled
Hexagon socket set screw with ring cutter ISO 4029, A2 stainless steel, 21H, plain
Plus Quadro-L Vario hammer drill bit