Sliding door shell-type handle type B
Shell-type handle, type B
SHELL-F.SLIDDR-TYPB -A2
Register now and access more than 125,000 products
The sliding door shell-type handles are pressed in and held by harpoon bars.
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
Suitable for wooden interior sliding doors.
 | |
Type description | Type B |
Material | Stainless steel |
Gloss level | Matt |
Suitable for | Sliding wooden doors |
DIN direction | DIN R/L |
Outer diameter | 75 mm |
Internal diameter | 61 mm |
Included in delivery | 2 x sliding door shell-type handles |
Diameter of hole | 67 mm |
Last viewed
TX double box-end wrench
Collated nails and gas cartridge NG CS-2/3 HFB
3/8" cardan joint insert short
Tapping screws and combi tapping screw assortment, hex head 890 pieces in system case 4.4.1. Tapping screws DIN 7976
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Repair set For cable feed device CPS 4.5
Hexagonal bolt with shank
3/8 inch extension
Allen key
TIME-SERT® threaded bushing