Sliding door shell-type handle
Shell-type handle f sliding doors, f recess, oval
SHELL-F.SLIDDR-OV-BRS-(CR)-MAT
Register now and access more than 125,000 products
We recommend attaching the shell-type handle to the plastic base rosette at two points using neutral silicone.
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
Suitable for embedding on interior sliding doors.
A mechanical artistry drill Ø 30 mm can be used for recessing.
 | |
Material | Brass |
Surface | Chrome plated |
Gloss level | Matt |
Design | Without perforation |
Length | 125 mm |
Width | 39 mm |
Type of assembly | For embedding |
Suitable for | Sliding wooden doors |
DIN direction | DIN R/L |
Number of mounting points | 2-point |
Hole distance (vertical) | 104.5 mm |
Diameter of hole | 3 mm |
Last viewed
Twist drill bits HSS DIN 338 type RN TIN head
30-mm point chisel, hex.
Hexagonal bolt with thread up to the head DIN 933, A4 80 stainless steel, plain
Single-lever sink PRO
Double open-end wrench assortment
Glazing packer assortment For long-lasting, professional block setting of glazing units
Double securing shackle FIXB 227 With pre-assembled 27 mm nail type HN 101
Spring clamp For door closer with slide rail
Blade receptacle Uninsulated
VDE junction box W12