Short locking bolt without locking groove, with fine thread
A1 stainless steel, short design, fine thread
INPL-MR-A1-KURZ-M16X1,5X54
Register now and access more than 125,000 products
Moving to a different locking position is possible only once the bolt has been manually disengaged
Locking bolts are used wherever a change in the locking position due to transverse forces is to be prevented.
 | |
Material | Stainless steel A1, 1.4305 |
Material of handle | PA - Polyamide |
Material of pin | Stainless steel A1, 1.4305 |
Surface | Plain |
RoHS-compliant | Yes |
Drive type | Outer hexagon |
Thread form | Fine pitch thread |
Form | B without latching notch, with lock nut |
Thread type x nominal diameter x pitch (d1) | M16 x 1.5 |
Stud diameter (d2) | 8 mm |
Head diameter (dk) | 33 mm |
Length (l1) | 54 mm |
Shaft length (ls) | 12 mm |
Height of the nut (h2) | 10 mm |
Height (h1) | 8 mm |
Chamfer height (f1) | 2.3 mm |
Width across flats (SW1) | 19 mm |
Spring force start (F1) | 14 N |
Spring force end (F2) | 28 N |
Width across flats 2 (SW2) | 24 mm |
Product weight (per item) | 0.100 g |
Datasheets(X)
Last viewed
Handle sleeve For packaging film
Wood biscuit joiner HVF 800
ALG 18 V M-CUBE charger
LED surface-mounted lamp ABL-230-2
Agitating basket For viscous, adhesive materials
Pneumatic ratchet screwdriver DRS 1/4 inch
Housing For Fixograss 9000 shelf support
Universal holder E 6.3 (1/4") With stainless steel sleeve, snap ring and permanent magnet
Magno padlock
Ring nut DIN 582, steel C15E, zinc-plated, blue passivated (A2K)
