Sheet metal nut Plastic standard design
Plastic speed nut standard design
MP-OPEL-NUT-PLA-GREEN
Register now and access more than 125,000 products
- Very secure mounting
To obtain optimal assembly conditions, the screw thread should be at least as long as the height of the plastic nut.
Datasheets(X)
- Fastening metal sheets with 0.5-5.0 mm thickness
- Fastening with screws that are suitable for plastic, e.g. WÜPLAST
 | |
Drill hole diameter | 7.00 mm |
Min./max. attachment thickness | 1.50-2.00 mm |
Length (A) | 16.00 mm |
Width (B) | 12.00 mm |
Height (C) | 18.00 mm |
Distance between centre of hole and edge (D) | 8.50 mm |
Colour | Green |
Material | PP - Polypropylene |
Suitable for vehicle manufacturer | Opel/Vauxhall |
Corresponds to original spare part number | 1235884, 24417039, |
Suitable for screw | Diameter 5.0 mm |
Last viewed
Screwdriver for hexagon drive with flexible shaft
Main filter basket For dry vacuum cleaners
ECOSLIDE full-extension concealed slide With integrated hydraulic damper
3/4-inch impact socket wrench insert hexagon, metric, short
Gas cartridge For DIGA® CS-2 POWER and DIGA® CS-3
1" slider bar With pin detent
Fabric sanding belt Zirconia alumina electric grinding file
Guide drill bit A014C For adapter A2
Holder For 12 mm, 20 mm and 30 mm countersinks
VM 175 full face mask