Setting tool for W-SA TC Timber Connect concrete screw anchors

Name: Setting tool for W-SA TC Timber Connect concrete screw anchors
Brand: Würth
SKU: 0901575001

Screw anchor setting tool, W-SA TC Timber Connect
STGTL-(F.ANC-(W-SA-TC))-D7,5

Art.-no. 0901575001

EAN 4050382226617

All versions

Prices for customers after login

Setting tool for W-SA TC Timber Connect concrete screw anchors

Art.-no. 0901575001

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +34928189825

Specification

For correct installation of the W-SA TC Timber Connect screw anchor

The setting tool prescribed for the installation of the W-SA TC in accordance with approval Z-21.1-1917

With embedment depth mark, so that the screw anchor can be installed correctly depending on the height of the fixture

Coordinated system of screw drive and bit for an improved fit and optimum load transmission

TX30 for W-SA TC 7.5 - for tangential impact drivers with 1/4 inch hexagon socket drive

TX45 for W-SA TC 10 - for tangential impact drivers with 1/2 inch square drive

TX50 for W-SA TC 12 - for tangential impact drivers with 1/2 inch square drive

The W-SA TC Timber Connect screw anchor must be fitted using the appropriate setting tool and a suitable tangential impact driver. The required length of thread engagement (hnom) in the concrete must be observed. The thickness of the fixture can be selected via the marking on the setting tool. The required length of thread engagement is reached when the marking is flush with the surface of the wooden fixture.