Setting mandrel
AMO-Max setting mandrel
STGMNDRL-F.AMOMAX-1-10/14/16
Art.-no. 0911112001
EAN 4038898385950
Register now and access more than 125,000 products
Test reports 031-02 and 05-141
1. Pre-drill external thermal insulation composite system (without impact)
2. Drill centre drill hole into the substrate
3. Produce a drill hole suitable for the substrate and anchoring element
Insert the reset pin and then install the spacer
Drive in the spacer using the impact sleeve
Remove setting mandrel
1. Set fastening element (e.g. anchor rod) in place
2. Fit spacer and plastic sleeve
Fix and install attachment (in accordance with the installation instructions for the mounting element)
Test reports 031-02 and 05-141
Datasheets(X)
Suitable for drill hole diameter | 10 mm, 14 mm, 16 mm |
Last viewed
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A2 stainless steel, plain
F8 Nova Pro Scale internal panel for H90 and H186 internal drawers
Hexagon nut, low profile, with clamping piece (non-metal insert) DIN 985, A4 stainless steel, plain
Hexagon bolt with shank DIN 931, A4-70 stainless steel, plain
Silicone fluid silicone spray
Hexagon socket set screw with ring cutter ISO 4029, steel, 45H, plain
Hexagon bolt with shank ISO 4014, steel 10.9, plain
Hexagon bolt with shank ISO 4014, steel 10.9, plain
WNA 200 ear defenders
Countersunk screw with hexagon socket head ISO 10642, steel 8.8, zinc-plated, blue passivated (A2K)