Self-tapping screw
DIN 7500-1 steel zinc plated pan head TX shape PE
SCR-HRDHD-FLG-TX30-(ZN)-M7X20
Register now and access more than 125,000 products
Self-tapping screws form a nut thread in cast blind holes, rim holes, drilled, lasered and punched sheet metal parts. Unlike thread cutting, self-tapping does not interrupt the material structure in the receiving thread. Instead, the material is displaced and strain-hardened.
Eliminates thread cutting
Saves money
Non-cutting thread formation
Large thread flank overlap
High load-bearing capacity
Strain-hardened receiving thread (nut thread)
Greater load-bearing capacity
Play-free and self-locking thread seating
- Reduced likelihood of screw working loose
Protection against loss
The formed thread corresponds to a standard metric thread
Datasheets(X)
 | |
Length (l) | 20 mm |
Internal drive | TX30 |
Material | Steel |
Surface | Zinc plated |
Last viewed
3/8 inch cardan joint
Flat washer For hexagon head bolts and nuts
Pan head tapping screw, C shape with H recessed head DIN 7981, steel, zinc-plated, blue passivated (A2K), shape C, with tip
Timing tool set 5 pieces, for Opel 2.0-2.2, petrol
Needle and nozzle kit ESENCIAL W21
Standard cable tie with plastic latch
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
M8 reducer attachment
Separating rail for centre separation
Metric combination wrench with POWERDRIV®