Self-drilling façade construction screw Sandwich piasta® A2 stainless steel
Self-tapping facade screw, sandwich piasta
SCR-DBIT-SANDW-WSH19-(RUS)-5,5X78
ZEBRA PIASTA
Register now and access more than 125,000 products
The sealing washer consists of an A2 stainless steel metal back with vulcanised seal made of high-quality EPDM
Reduction of the assembly time using the drill tip by min. 50 %:
- Drilling without centre-punching
- Thread forming
- Fastening
All in one operation.
Suitable according to ETA-13/0210 for sandwich mounting on steel substructures ≤ 5 mm
Datasheets(X)
CAD data (available after login)
 | |
Material | Bimetal |
Surface | Flake zinc |
Material of sealing washer | Stainless steel A2 |
Surface of the sealing washer | Plain |
Material of gasket | Ethylene propylene diene terpolymer rubber |
RoHS-compliant | Yes |
Head type | Hexagon head with collar |
Drive type | Hexagon |
Thread type | Self-tapping screw thread |
Thread design | Partial thread with underhead thread |
Shape of tip | Drilling tip |
Underground | Steel |
Nominal diameter (d1) | 5.5 mm |
Length (l1) | 78 mm |
Head height (k1) | 5 mm |
External drive (s1) | WS8 |
Outside diameter of the sealing washer (d2) | 19 mm |
Drill tip length (lp) | 7.5 mm |
Max. material thickness to be drilled through (metal) | 5.25 mm |
Min. recommended substructure thickness | 2 mm |
Screw-thread length with drill tip (b) | 36 mm |
Min./max. attachment thickness | 42-52 mm |
Internal drive | 0 - not applicable |
Approval | ETA-13/0210 |
Last viewed
Standard cable tie with plastic latch
Needle and nozzle kit ESENCIAL W21
Protective film For Ultimate face shields
Speed cutting disc For stainless steel
Twist wood drill bit HSS With 1/4 inch bit mount, DIN 3126 shape C
ALG 18 V M-CUBE charger
Diamond tile dry core bit M14 seat
Hand tap, taper tap HSS DIN 352
Particle filter P3 R For breathing protection series 175
Nozzle For cordless blind rivet gun