Sealproof accelerant EVO
Additive for surface coating Sealproof EVO
ADD-SRFCOAT-PU-TRANSP-1KG
Register now and access more than 125,000 products
Accelerates the cure time of the Sealproof EVO.
Drying time approximately 15°C for 4-6 hours.
Eliminates air formation inside the membrane.
Eliminates curing bubbles and other defects in the Sealproof EVO membrane.
Increased product thixotropy.
Allows Sealproof EVO to be applied in thick layers
The entire product must be mixed with Sealproof EVO 25 kg to achieve the desired effects.
These instructions are merely recommendations based on our experience. We recommend performing tests for each new type of application or surface to be treated.
Datasheets(X)
The product is formulated to act in combination with 25 kg of Sealproof EVO, without affecting the properties of the resulting membrane. Add accelerant to the liquid membrane and mix gently with an electric mixer until completely homogenised. Leave to stand for a few minutes before applying. Once an accelerant has been added to the Sealproof EVO, it is recommended that no other diluent be added
Consumption:
The ratio between the Sealproof EVO accelerant and Sealproof EVO 25 kg is 1 litre/25 kg.
Weight of content | 1.5 kg |
Contents | 1 l |
Colour | Transparent |
Chemical basis | Aromatic amine |
Density | 0.87 g/cm³ |
Shelf life from production | 12 Month |
Last viewed
Hand tap, taper tap HSS DIN 352
Cable ties, KBL INOX, AISI 304 stainless steel With ball seal
Mandatory sign
Type 80 staples
Axle For corrugated pipe cutter
Allen key, hexagon socket with ball head Extra-long design
Metric combination wrench with POWERDRIV®
Pressure regulator With integrated hose failure safety device
Multi-socket wrench 1/4 inch Assortment of 23 pieces
Lock plate with tabs