Sealing ring, aluminium, shape A
DIN 7603 aluminium, shape A
RG-SEAL-DIN7603-ALU-A-8X11,5X1
Register now and access more than 125,000 products
- An aluminium ring can be used anywhere (except in the presence of some strong acids) due to its corrosion resistance.
- Via special preheating, the metal ring's structure softens further so that, when under pressure, it can embed itself into all the uneven areas of the parts to be screwed together.
When using the sealing rings, you should be aware that the dimensions are specified in the inner and outer diameter – if the space is tight, the inner diameter is decisive, as a 10x12 washer can be replaced with a 10x14 or even a 10x16 washer, for example.
Datasheets(X)
 | |
Material | Aluminium |
Surface | Plain |
Form | A |
Nominal size | 8 x 11.5 mm |
Internal diameter (d1) | 8.2 mm |
Outer diameter (d2) | 11.4 mm |
Thickness (h1) | 1.0 mm |
Max. temperature resistance | 200 °C |
DIN | 7603 |
Last viewed
3/8 inch cardan joint
Rubber valve for scooters SNAP-IN
Hand-held stapler HT 53 High impact strength for thin materials
Corrosion protection spray
Countersunk tapping screw, shape C with hexalobular drive
Dispenser system
Basket coil adapter K 300
Wing-tip drilling screw, countersunk milling head with pias AW drive®
Ball knob DIN 319, thermoset FS 31, black polished, shape C with thread made of plastic
Blade receptacle Uninsulated