Sealing primer PRIMER PU
Sealer primer PU PRIMER
PRIM-PU-ISOLPUR-WHITE-5KG
Register now and access more than 125,000 products
Properties
- Does not yellow
- For indoor and outdoor use
- Easy-to-apply single component
- Compatible with cement and alkaline supports
- Quick drying
Do not apply at temperatures below +5ºC or above +40ºC. Do not use when it is expected rain within 4 to 5 hours after application. Do not apply to metal surfaces.
Repainting time: 4 hours.
Total drying time: 1–2 hours.
18 m2/kg. Varies depending on the type of surface, the absorption of the support and the application method.
This information is a recommendation only, based on our experience. However, we cannot accept liability for individual results with this product due to the multiple possible applications and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.
Datasheets(X)
Neutralising sealer for cement alkalinity. Prevents defects and micro-fissures of ELASPUR PLUS and ISOLPUR PLUS on porous and absorbent supports. Improves adhesion of subsequent layers and regulates film formation by preventing absorption of water by ELASPUR PLUS.
Ready to apply. Do not dilute. On any support and under all circumstances, when using the product as a sealing agent for the waterproofing process, 1% PU ADITOR 0892 214 006 should be added. For 5 kg of PU PRIMER, add 50 g of PU ADITOR. Apply the product on a clean, dry, grease-free surface with a roller, brush or Airless system, saturating the surface so that the pores are sealed. When applied as a primer in transparent ISOLPUR PLUS processes, avoid excessive PU PRIMER, so as not to leave an opalescent/opaque final appearance.
Contents | 5.15 l |
Colour | Milky white |
Chemical basis | Polyurethane acrylic |
Solvent-free | Yes |
Min./max. processing temperature | 5 to 35 °C |
Can be further processed after min. | 1 h |
Further processing conditions | at 20°C |
Weight of content | 5 kg |
Last viewed
Screw cap For application gun
Zinc adhesive weight For cars
Doorstop, type L
Wood connector plate
Mandatory sign
Holstein sand shovel red powder-coated
Furniture handle screw
W-VIZ-A anchor rod, zinc-plated steel for W-VIZ/S injection systems (concrete)
Filter screen With colour code for simple visual identification of mesh size
Electronic solder no. 10