Sealing primer
Penetrating primer
CLRLACSPR-PENETRATINGPRIMER-CLEAR-400ML
Register now and access more than 125,000 products
Primer
- The sealing primer straightens the wood fibres
- Sanding in between coats produces a smooth surface
Uniformity
The deep-action effect of the sealing primer creates a more even surface.
Cost-effective
Economical pre-treatment of surfaces. There is no need to use an expensive final varnish.
The sealing primer is not suitable for synthetic resin paints. Upturn the can after use and spray until the valve is empty.
The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, this service is provided under the exclusion of any liability, unless the advice or information given falls within the scope of our specified, contractually agreed scope of services or the consultant was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and carry out further development.
Datasheets(X)
Primer for wood (untreated softwoods and hardwoods).
Shake the can vigorously and perform a spray test. Evenly and lightly spray the natural wood with sealing primer to obtain a transparent covering, holding the can 20-30 cm from the surface; allow to dry. Then use a fine sandpaper to sand the dry surface and upright wood fibres smooth. Dust off the wood surface to remove dirt and paint particles. Now apply the final protective surface coating of anti-fogging clear varnish spray.
Chemical basis | Nitroacrylate |
Contents | 400 ml |
Colour | Transparent |
Shelf life from production | 60 Month |
Ignition temperature | 365 °C |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
Mitre snips For straight and 45° cuts
Assembly platform Compact and sturdy
Metric double box-end wrench with POWERDRIV®
Guide drill bit A014C For adapter A2
1-inch impact socket wrench insert hexagon, metric, short
Threaded fitting DIN 976-1 (shape A) with standard metric ISO thread, zinc-plated steel 4.8, blue passivated
1/4 inch socket wrench insert, metric short
TX double box-end wrench
Professional water hose
Bayonet adapter BS 37 For brake bleeder