Sealant for wooden joints
Acrylic sealant 1 component for wooden joints
ACRYSEAL-WOJNT-OAK-310ML
Register now and access more than 125,000 products
Excellent applicability
Can be painted or varnished
Test the product first.
Great elasticity
Solvent-free
Good thixotropy
Does not darken
Odourless
Does not corrode the varnish
Avoid three-point bonding. The sealant can only be bonded with two points during application. Any other bonding on a surface can cause cracks that reduce the sealing capacity from 100% due to movements. To avoid three-point bonding, you must first fill the crack with filler material.
This information is a recommendation only, based on our experience. However, we cannot accept responsibility for individual results with this product, due to its numerous potential applications, and storage and application conditions that are beyond our control. We always recommend that you test the product first. We guarantee the quality of our products. We reserve the right to make technical alterations and developments.
Datasheets(X)
For sealing cabinets, windows, doors, wooden floor skirting boards, laminate flooring, parquet and other wood materials.
Surfaces should be clean, dry and free from dust and grease. Cut the tip of the cartridge, screw on the end piece and cut in an oblique angle at the height corresponding to the thickness of the seam to be applied.
Wait approximately one hour before applying varnish or paint. The product is sensitive to the cold, so do not apply at temperatures below 5ºC. Do not use on joints that support deformation exceeding 10%.
Colour | Oak |
Contents | 310 ml |
Container | Cartridge |
Chemical basis | Acrylic resin dispersion |
Density | 1.06 g/ml |
Smell/fragrance | Characteristic |
Min. skin-formation time | 11 min |
Shore A hardness | 40 |
Min./max. temperature resistance | -10 to 80 °C |
Min./max. processing temperature | 5 to 35 °C |
Shelf life from production | 5 Years |
Last viewed
Centre drill Tungsten carbide
Small mist lubricator For pneumatic tools
3/4-inch impact socket wrench insert hexagon, metric, short
ASSY® D
plug screw Countersunk head
ELMO clip with locking
TX screwdriver with round shank
Acrylic thinner, short For 2-component acrylic products and 1-component thick coat lacquers
MFD-S multi-purpose drill bit with straight shank
1/2" socket wrench insert For TX screws, short
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, plain